Simple and Delicious Pemmican Recipe (2024)

This post may contain affiliate links.* As an Amazon Associate I earn from qualifying purchases. Click here to read our affiliate policy.

Estimated reading time: 6 minutes

Simple and Delicious Pemmican Recipe (1)

European explorers learned all kinds of things from Native Americans. Fish as fertilizer, the three sisters gardening method, and the process of making pemmican. The word comes from the Algonquin language known as Cree and the direct translation is rendered fat.

Because of the translation, you should understand that the basic ingredients of any pemmican recipe are meat and fat. Things like honey, fruits, nuts, and seasonings are added as well, for the most part, you are making a dried meatball that is preserved in its own fat. Some people also use bacon drippings for flavor.

Article continues below.

In this how-to article, we are going to create our own pemmican and I will walk you through the steps. I will also provide you with some variant recipes that are delicious.

Recipe for Pemmican

Ingredients:

  • 2 lbs Quality Grass Fed Beef or Game Meat
  • ½ Cup Lard
  • 2 Tbsp Honey
  • ¼ Cup of Walnuts
  • About 8 dried apricots

Tools:

  • Deep pan to dry beef
  • Smaller pan to dry fruits
  • Food processor or Mortar and Pestle
  • Large mixing bowl
  • Wooden spoon

Directions:

STEP 1

It’s very important to take a sharp knife and slice that meat as thin as you can. The thinner your meat, the better to start with. This will all pay off when the time comes to break that meat down.

If you are making pemmican with a very sparse kitchen, limited skills, and merely for survival, I would recommend using a nice fatty ground beef. Otherwise, you can use very thin slices of beef and dry them in the same way.

I am using local grass-fed ground beef that is 80/20 fat to meat. Of course, I want to use the rendered fat for our pemmican, but you will need to add lard.

STEP 2

Spread the meat out thinly on a baking sheet or a perforated cooking sheet. I use one with high sides, so I can capture all that great fat coming off the meat. I like to salt the meat when I dry it in the oven as well. Just a light sprinkle across the meat. This also adds the preserving qualities of salt. It’s not necessary, but I do it.

Simple and Delicious Pemmican Recipe (2)

STEP 3

Dry this meat in the oven on the lowest setting for 8 hours or however long it takes. If you are using ground beef, you will have to drain the fat at some point. Don’t throw that fat away. You need to save it for a later part of the process. Most people use thinly sliced meat and that is the classic method, but I find that ground beef gets you to the pulverized state faster.

STEP 4

Grind the meat down as fine as possible. I recommend using a food processor. This is a very important part of the process. By doing this, you will be able to get maximum coating from the rendered fat. You want the rendered fat to cover the meat and the meat to fill out all of the added fat. There should not be a layer of melted fat floating above your meat.

STEP 5

Now pour the rendered fat onto the dried meat and mix it up. The pemmican mix should look like a ragu or a thick sauce. If you add too much fat you are going to have to strain some of it out. This is very important. Too much fat will make your mix inedible.

Simple and Delicious Pemmican Recipe (3)

STEP 6

The fat that you poured off your ground beef can now be mixed back into the dried meat. Add the lard as well and stir everything.

At this point, stir in any dried fruit or nuts. For this recipe, stir in the chopped walnuts and the apricots. Stir everything very thoroughly.

Simple and Delicious Pemmican Recipe (4)

STEP 7

Let the mix cool to room temperature. From here you can store it in many ways. We are going to use an ice cube tray to portion them out and then roll them into balls. You can also create loaves in a pan or small bricks in a ziplock bag.

Simple and Delicious Pemmican Recipe (5)

Variant Recipe Additions

  1. Add chopped dried apricots and cherries.
  2. Add lots of black pepper and raisins.
  3. Add soy sauce to the meat while drying, then crushed peanuts and ginger.

Conclusion

The store shelves are riddled with all types of granola and energy bars that are very popular. These bars often find a place in the backpacks of the modern adventurer. You see, pemmican is old news. While it is making a resurgence in survival circles, this fatty meat mix was probably given up when people started having concerns about things like cholesterol and heart attacks. We ran from fatty red meat for years and it was all due to bad science.

The great news is that fat is back! We know that it’s an essential ingredient in running a healthy human machine. For men, fat is incredibly important in terms of testosterone production. Because of this, we can enjoy those red meats and healthy fats again.

The irony in all of this is that pemmican was abandoned for sugary granola bars on the trail. Now we know that sugar was an under-the-radar killer being sold to the American public as a delicious treat. Turns out we should have been eating more meat and fat the whole time!

You May Also Like:

  • 14 Forgotten Emergency Foods You Should Stockpile
  • How To Render Lard The Easy Way
  • How to Make Soap from Fat and Ashes
  • How to Make a Bacon Fat Candle
  • 3 Reasons To Start Canning Meat

Simple and Delicious Pemmican Recipe (2024)

FAQs

What is the ratio of fat to meat in pemmican? ›

The pânsâwân was then spread across a tanned animal hide pinned to the ground, where it was beaten with flails or ground between two large stones till it turned into very small pieces, almost powder-like in its consistency. The pounded meat was mixed with melted fat in an approximate 1:1 ratio by weight.

What are the best spices for pemmican? ›

This will make the pemmican with the best shelf life. 1–Place raw ground meat in a mixing bowl. Mix in your favorite spices like: black pepper, anise, rosemary, lavender. (This is my favorite all-round combo but it's good to have several varieties.)

How to make modern day pemmican? ›

How to Make Your Own Pemmican
  1. Dry the meat like jerky, slicing thin pieces against the muscle grain. ...
  2. Build a drying rack over a fire. ...
  3. Powder the dried meat finely using stones, a mortar and pestle, or a food processor.
  4. Dehydrate the berries. ...
  5. Melt tallow from beef, venison, elk or bison.
Nov 15, 2023

What keeps pemmican from spoiling? ›

Suet is the fat around the kidneys of the cow and works best for pemmican because it stays hard at room temperature and will help to preserve your meat. Stay away from lard or any nut oils as they will tend to go rancid faster.

What is the best fat for making pemmican? ›

Render beef or bear fat (suet is preferred) – slowly heat trimmed fat until it turns to a clear liquid, strain off liquid. Let the liquid cool. This liquid is the rendered, shelf-stable fat to be used in the pemmican. Mix your dry powders and salt.

What is the best meat to use for pemmican? ›

Traditional Native American pemmican was only fat and beef (buffalo, elk, etc.). Other stuff like berries was added for settlers and fur traders for more flavor. The traditional recipe has no flavor appeal, it's for no frills survival.

Can you use Crisco to make pemmican? ›

Take 1 pound of finely ground jerky Add 4 tablespoons of finely ground or powdered dried fruit, berries or herbs (such as sage, cherries or blueberries) Add sugar to taste if sweet pemmican is desired Mix in just enough lard (such as Crisco) to hold the dried ingredients together.

How much honey do you put in pemmican? ›

Ingredients
  1. 1/2 cup Burleson's South Texas Huajillo Honey.
  2. 1/2 cup raisins.
  3. 1/2 cup pitted dates.
  4. 1/2 cup figs.
  5. 1/2 cup almonds.
  6. 1/2 cup cashews.
  7. 1/2 cup walnuts.
  8. 1/2 cup pecans.

How do you make pemmican step by step? ›

7 Steps to Follow for a Pemmican Recipe
  1. Choose your meat and berries. Mix and match different types of fruits and berries when you make your own pemmican. ...
  2. Dehydrate the ingredients. ...
  3. Grind the meat and berries. ...
  4. Strain out the fat. ...
  5. Mix the ingredients together. ...
  6. Cool the pemmican. ...
  7. Store the pemmican.
Apr 18, 2022

Can you use nuts in pemmican? ›

Pemmican ingredients varied widely, but they always included lean venison or buffalo meat mixed with fat. Some pemmican recipes also incorporated dried berries and nuts for added flavor and nutrition.

Can bacon grease be used in pemmican? ›

That's entirely up to you. I used the fact from 3 pieces of center cut bacon, used some stored bacon fat and then added coconut oil until I had about a half a cup of fat. If you have some bacon grease stored away, this is the perfect time to put it to use. The cooked pieces of bacon were used in the recipe.

What food is similar to pemmican? ›

Both pemmican and jerky are high in protein, making them excellent choices for a nutritious snack. Pemmican, with its combination of dried meat and fat, provides a calorie-dense option.

How much pemmican do you need to survive? ›

40 day winter: 12800 pemmican. 50 day winter: 16000 pemmican. These are near-minimums, though, and you should shoot for higher. (I say near because a colonist can survive for five days without food.)

How much pemmican per person per day? ›

Pemmican (One Pound of pemmican per day) Go here to learn how to make your own. Pemmican is the best backpacking staple because there is nothing that can compare to nutrient density. Pemmican is power packed with healthy animal fats mixed with dried pulverized meats and berries.

Can you use jerky to make pemmican? ›

One of the two primary ingredients for making pemmican is dried meat, as in dried beef or venison jerky. You can use store-bought jerky, but if it's very pliable it means there is residual moisture and moisture can make foods spoil.

What is the ratio for pemmican? ›

One final note: Exact measurements aren't given here because of the variability that can exist between different dry ingredients and how dry they ultimately are. In general, pemmican calls for a ratio of roughly 1:1 tallow to dry ingredients.

What is the best fat to meat ratio? ›

And on this, experts concur — the most popular and flavorful ratio of lean to fat comes in at 80/20. Paul Vaccari, owner of New York City's Piccinini Brothers, which sells to restaurants as well as individuals, says his most popular mixture for hamburgers is an 80/20 ground chuck.

What is the fat to meat ratio for beef? ›

It really depends on what you're looking for in your ground beef. Generally, the 80 to 20 ratio is preferred for hamburger patties. You can use it in our best burger recipe. While it's true that leaner meat helps keep the patty together, a higher level of fat ultimately makes for a juicier, more flavorful burger.

What is the best beef fat ratio? ›

To make more healthful burgers—but ones that are still pretty juicy and tasty—choose ground beef that is 80 percent lean and 20 percent fat. Ground beef that contains less than 15 percent fat makes dry and somewhat tasteless burgers. To see what the lean-to-fat ratio is on ground beef packages, look on the label.

Top Articles
Latest Posts
Article information

Author: Neely Ledner

Last Updated:

Views: 6174

Rating: 4.1 / 5 (42 voted)

Reviews: 81% of readers found this page helpful

Author information

Name: Neely Ledner

Birthday: 1998-06-09

Address: 443 Barrows Terrace, New Jodyberg, CO 57462-5329

Phone: +2433516856029

Job: Central Legal Facilitator

Hobby: Backpacking, Jogging, Magic, Driving, Macrame, Embroidery, Foraging

Introduction: My name is Neely Ledner, I am a bright, determined, beautiful, adventurous, adventurous, spotless, calm person who loves writing and wants to share my knowledge and understanding with you.