Four new CSS features for smooth entry and exit animations  |  Blog  |  Chrome for Developers (2024)

Motion is a core part of any digital experience, guiding your user from one interaction to the next. But there are a few gaps in smooth animations on the web platform. These include the ability to easily animate entry and exit animations, and smoothly animate to and from the top layer for dismissible elements such as dialogs and popovers.

To fill these gaps, Chrome 116 and 117 includes four new web platform features, which enable smooth animations and transitions for discrete properties.

These four new features include:

  • The ability to animate display and content-visibility on a keyframe timeline (From Chrome 116).
  • The transition-behavior property with the allow-discrete keyword to enable transitions of discrete properties like display (From Chrome 117).
  • The @starting-style rule to animate entry effects from display: none and into the top-layer (From Chrome 117).
  • The overlay property to control top-layer behavior during an animation (From Chrome 117).

Display animations in keyframes

From Chrome 116, you can use display and content-visibility in keyframe rules. These will then swap at the time the keyframe occurs. No additional new values are required to support this:

.card { animation: fade-out 0.5s forwards;}@keyframes fade-out { 100% { opacity: 0; display: none; }}

The preceding example animates the opacity to 0 over the 0.5s duration and then set display to none. Additionally, the forwards keyword ensures that the animation remains at its end state, so that the element it is applied to remains display: none and opacity: 0.

This is a simple example that mimics what you can do with a transition (see demo in transition section). Transitions, however, are unable to create more complex animations, such as the following example:

.card { animation: spin-and-delete 1s ease-in forwards;}@keyframes spin-and-delete { 0% { transform: rotateY(0); filter: hue-rotate(0); } 80% { transform: rotateY(360deg); filter: hue-rotate(180deg); opacity: 1; } 100% { opacity: 0; display: none; }}

The spin-and-delete animation is an exit animation. First, the card will spin on the y-axis, run through a hue-rotation, and then at 80% through the timeline, transitions its opacity from 1 to 0. Finally, the card swaps from display: block to display: none.

For these exit animations, instead of applying them directly to an element, you can set up a trigger for the animations. For example by attaching an event listener to a button that triggers a class to apply the animation, like so:

.spin-out { animation: spin-and-delete 1s ease-in forwards;}
document.querySelector('.delete-btn').addEventListener('click', () => { document.querySelector('.card').classList.add('spin-out');})

The example above now has an end-state of display:none. There are many cases where you’ll want to take it further and remove the DOM node with a timeout to allow for the animation to finish first.

Transitioning discrete animations

Unlike when animating discrete properties with keyframes, to transition discrete properties you’ll need to use the allow-discrete transition behavior mode.

The transition-behavior property

The allow-discrete mode is what makes discrete transitions possible, and is a value of the transition-behavior property. transition-behavior accepts two values: normal and allow-discrete.

.card { transition: opacity 0.25s, display 0.25s; transition-behavior: allow-discrete; /* Note: be sure to write this after the shorthand */}.card.fade-out { opacity: 0; display: none;}

The transition shorthand also sets this value, so you can omit the property and use the allow-discrete keyword at the end of the transition shorthand for each transition instead.

.card { transition: opacity 0.5s, display 0.5s allow-discrete;}.card.fade-out { opacity: 0; display: none;}

If you are animating multiple discrete properties, you will need to include allow-discrete after each property you would like to animate. For example:

.card { transition: opacity 0.5s, display 0.5s allow-discrete, overlay 0.5s allow-discrete;}.card.fade-out { opacity: 0; display: none;}

The @starting-style rule for entry animations

So far, this article has covered exit animations, to create entry animations you need to use the @starting-style rule.

Use @starting-style to apply a style that the browser can look up before the element is open on the page. This is the “before-open” state (where you are animating in from).

/* 0. BEFORE-OPEN STATE *//* Starting point for the transition */@starting-style { .item { opacity: 0; height: 0; }}/* 1. IS-OPEN STATE *//* The state at which the element is open + transition logic */.item { height: 3rem; display: grid; overflow: hidden; transition: opacity 0.5s, transform 0.5s, height 0.5s, display 0.5s allow-discrete;}/* 2. EXITING STATE *//* While it is deleting, before DOM removal in JS, apply this transformation for height, opacity, and a transform which skews the element and moves it to the left before setting it to display: none */.is-deleting { opacity: 0; height: 0; display: none; transform: skewX(50deg) translateX(-25vw);}

Now you have both an entry and exit state for these TODO list items:

Animating elements to and from the top-layer

To animate elements to and from the top-layer, specify the @starting-style on the “open” state to tell the browser where to animate in from. For a dialog, the open state is defined with the [open] attribute. For a popover, use the :popover-open pseudo class.

A simple example of a dialog could look like this:

/* 0. BEFORE-OPEN STATE */@starting-style { dialog[open] { translate: 0 100vh; }}/* 1. IS-OPEN STATE */dialog[open] { translate: 0 0;}/* 2. EXIT STATE */dialog { transition: translate 0.7s ease-out, overlay 0.7s ease-out allow-discrete, display 0.7s ease-out allow-discrete; translate: 0 100vh;}

In the next example, the entry and exit effects are different. Enter by animating up from the bottom of the viewport, exit the effect to the top of the viewport. It is also written with nested CSS for more visual encapsulation.

When animating a popover, use the :popover-open pseudo class instead of the open attribute used previously.

.settings-popover { &:popover-open { /* 0. BEFORE-OPEN STATE */ /* Initial state for what we're animating *in* from, in this case: goes from lower (y + 20px) to center */ @starting-style { transform: translateY(20px); opacity: 0; } /* 1. IS-OPEN STATE */ /* state when popover is open, BOTH: what we're transitioning *in* to and transitioning *out* from */ transform: translateY(0); opacity: 1; } /* 2. EXIT STATE */ /* Initial state for what we're animating *out* to , in this case: goes from center to (y - 50px) higher */ transform: translateY(-50px); opacity: 0; /* Enumerate transitioning properties, including display and allow-discrete mode */ transition: transform 0.5s, opacity 0.5s, display 0.5s allow-discrete;}

overlay property

Finally, to fade out a popover or dialog from the top layer, add the overlay property to your list of transitions. popover and dialog escape ancestor clips and transforms, and also put the content in the top layer. If you don't transition overlay, your element will immediately go back to being clipped, transformed, and covered up, and you won't see the transition happen.

[open] { transition: opacity 1s, display 1s allow-discrete;}

Instead, include overlay in the transition or animation to animate overlay along with the rest of the features and ensure it stays in the top layer when animating. This will look much smoother.

[open] { transition: opacity 1s, display 1s allow-discrete, overlay 1s allow-discrete;}

Additionally, when you have multiple elements open in the top-layer, overlay helps you control the smooth transition in and out of the top layer. You can see the difference in this simple example. If you are not applying overlay to the second popover when transitioning it out, it will first move out of the top layer, jumping behind the other popover, before starting the transition. This isn’t a very smooth effect.

A note on view transitions

If you are making DOM changes, such as adding and removing elements from the DOM, another great solution for smooth animations is view transitions. Here are two of the above examples built using view transitions.

In this first demo, instead of setting up @starting-style and other CSS transforms, view transitions will handle the transition. The view transition is set up like so:

First, in CSS, give each card an individual view-transition-name.

.card-1 { view-transition-name: card-1;}.card-2 { view-transition-name: card-2;}/* etc. */

Then, in JavaScript, wrap the DOM mutation (in this case, removing the card), in a view transition.

deleteBtn.addEventListener('click', () => { // Check for browser support if (document.startViewTransition) { document.startViewTransition(() => { // DOM mutation card.remove(); }); } // Alternative if no browser support else { card.remove(); }})

Now, the browser can handle the fade out and morph of each card to its new position.

Another example of where this can be handy is with the add/remove list items demo. In this case, you'll need to remember to add a unique view-transition-name for each card created.

Conclusion

These new platform features bring us one step closer to smooth entry and exit animations on the web platform. To learn more, check out these links:

Four new CSS features for smooth entry and exit animations  |  Blog  |  Chrome for Developers (2024)
Top Articles
Latest Posts
Article information

Author: Patricia Veum II

Last Updated:

Views: 6388

Rating: 4.3 / 5 (44 voted)

Reviews: 91% of readers found this page helpful

Author information

Name: Patricia Veum II

Birthday: 1994-12-16

Address: 2064 Little Summit, Goldieton, MS 97651-0862

Phone: +6873952696715

Job: Principal Officer

Hobby: Rafting, Cabaret, Candle making, Jigsaw puzzles, Inline skating, Magic, Graffiti

Introduction: My name is Patricia Veum II, I am a vast, combative, smiling, famous, inexpensive, zealous, sparkling person who loves writing and wants to share my knowledge and understanding with you.